Air Blower

RamdounPURE Water Air Blower System
The performance curves are based on air at a temperature of 15 °C and an atmospheric pressure of 1013 mbar with a tolerance of +/- 10 %.
The total pressure differences are valid for suction and ambient temperatures Up to 25 °C.
For other conditions please confer with us.
Item NO. |
Stage (S/D/3) |
Frequency HZ |
Power (KW) |
Voltage (V) |
Current (A) |
Air Flow m³/h |
Vacuum mbar |
Pressure mbar |
Sound dB(A) |
2RB 720 H47 |
Double |
60 |
6.3~ |
380-480△660-720Y |
13.3△/7.7Y |
385 |
-440 |
500 |
76 |
Each G-2RB type can be applied both as vacuum pump and compressor in
Continuous operation over the total stated performance curve range. The
Motors are available as standard for the input voltage range of 50 and 60 Hz
And for protection category IP 55 as well as approbated for UL and CSA
50/60 Hz IP55 isolation material
The figures are without obligations.
Other voltage ranges
2RB720-7H
50Hz 60Hz
185...225 V D/320...390 V Y 200...240 V D/345...415 V Y H 1
500 V D 575 V D C 5
Machines according to the ATEX norm 94/4 EG are available
Electromagnetic compatibility (EMC) EN55014-1/2, EN61000-2/-3/-4/-6.
1) For standard UL for ELECTRIC MOTOR UL 1004-1.
2) Relief-valve is available for limiting differential pressure.
3) Measuring-surface sound-pressure level acc. to DIN EN 21680, measured
At a distance of 1 m. The pump is throttled to an average suction pressure,
A hose is connected to the discharge side (compressor) / suction side
(Vacuum pump), but is not fitted with relief valves.
The motors are designed according to the DIN EN 60 034 / DIN IEC 34-1 and Temperature class F.
For the three phase machines the tolerances are +/- 10 % for fixed voltage and +/- 5 % for voltage range.
The single phase machines are designed with a +/- 5 % tolerances. If only 90 %
Of the maximum allowed pressure will be used for the continuous operating then
The allowed voltage range adds to +/- 10 %.
For all single and three phase machines which designed according to the UL and
CSA norm (UL 1004-1) the maximum allowed voltage tolerances are - 10 % resp. + 6 %.
The frequency tolerance is maximum +/- 2 %
« click here to see all products »